Arizona Polymer Flooring

Showing 1 - 12 of 23 results
APF - OIL STOP PRIMER 1.25Gal Kit
$87.99
  Oil Stop Primer is a low viscosity, 100% solids resin designed for use as a primer on concreteslabs that are contaminated with hydrocarbons, such as motor oil, solvents, cutting oils andhydraulics fluids.    Oil Stop Primer - Datasheet  Oil Stop Primer - Part A - SDS  Oil Stop Primer - Part B - SDS
  Oil Stop Primer is a low viscosity, 100% solids resin designed for use as a primer on concreteslabs that...
APF - VaporSolve™ Primer Clear Moisture Remediation Coating
$46.57
VaporSolve™ Primer is a specially formulated water-based epoxy designed to provide superior adhesion over concrete with high levels of moisture vapor emissions. When used with the companion finish coat, 100% solids VaporSolve™ 100, a coating system is achieved that reduces moisture vapor emissions to acceptable levels for all flooring and maintains its bond under continuously moist, alkaline conditions. VaporSolve™ Primer is also ideal over damp or green concrete. The product may be applied at temperatures between 40-100 °F. VaporSolve™ Primer is based on epoxy curing agent technology with more than 30 years of success as a concrete primer. It has been formulated with very low viscosity and surface tension to ensure excellent substrate wetting, penetration and adhesion. Laboratory testing has shown that VaporSolve™ Primer penetrates 25-30% deeper into concrete than low viscosity (250 cps) 100% solids epoxy. This exceptional penetration and adhesion gives VaporSolve™ Primer a distinct advantage over 100%...
VaporSolve™ Primer is a specially formulated water-based epoxy designed to provide superior adhesion over concrete with high levels of moisture...
APF - VaporSolve™ 100 Clear Moisture Barrier Coating
$72.47
VaporSolve™ 100 is a specially formulated 100% solids epoxy coating designed for use over concrete with high moisture levels for the purpose of isolating the concrete from moisture sensitive flooring. When used without a primer in a single application, it is referred to as the VaporSolve™ Basic System. This system should only be used over concrete that has never been treated with reactive silicate curing compounds or densifiers. VaporSolve™100 has been formulated with low viscosity and excellent substrate wetting capabilities to promote penetration and adhesion. The special hydrophobic curing agent allows for adhesion to damp or wet concrete. This product will cure fully even when applied underwater. In addition, VaporSolve™ 100 is based on Bisphenol F epoxy which gives the material enhanced chemical crosslinking over products based on standard Bisphenol A epoxy. More crosslinking helps to reduce the coating’s moisture permeability and increases its long-term resistance to water and alkalinity....
VaporSolve™ 100 is a specially formulated 100% solids epoxy coating designed for use over concrete with high moisture levels for...
APF - VaporSolve 100 Clear Moisture Barrier Coating
$72.47
VaporSolve 100 is a specially formulated 100% solids epoxy coating designed for use over concrete with high moisture levels for the purpose of isolating the concrete from moisture sensitive flooring. When used without a primer in a single application, it is referred to as the VaporSolve Basic System. This system should only be used over concrete that has never been treated with reactive silicate curing compounds or densifiers. VaporSolve 100 has been formulated with low viscosity and excellent substrate wetting capabilities to promote penetration and adhesion. The special hydrophobic curing agent allows for adhesion to damp or wet concrete. This product will cure fully even when applied underwater. In addition, VaporSolve 100 is based on Bisphenol F epoxy which gives the material enhanced chemical crosslinking over products based on standard Bisphenol A epoxy. More crosslinking helps to reduce the coatings moisture permeability and increases its long-term resistance to water and...
VaporSolve 100 is a specially formulated 100% solids epoxy coating designed for use over concrete with high moisture levels for...
APF - VaporSolve  Primer Clear Moisture Remediation Coating
$46.57
VaporSolve Primer is a specially formulated water-based epoxy designed to provide superior adhesion over concrete with high levels of moisture vapor emissions. When used with the companion finish coat, 100% solids VaporSolve 100, a coating system is achieved that reduces moisture vapor emissions to acceptable levels for all flooring and maintains its bond under continuously moist, alkaline conditions. VaporSolve Primer is also ideal over damp or green concrete. The product may be applied at temperatures between 40-100F. VaporSolve Primer is based on epoxy curing agent technology with more than 30 years of success as a concrete primer. It has been formulated with very low viscosity and surface tension to ensure excellent substrate wetting, penetration and adhesion. Laboratory testing has shown that VaporSolve Primer penetrates 25-30% deeper into concrete than low viscosity (250 cps) 100% solids epoxy. This exceptional penetration and adhesion gives VaporSolve Primer a distinct advantage over 100% solids...
VaporSolve Primer is a specially formulated water-based epoxy designed to provide superior adhesion over concrete with high levels of moisture...
APF - Polyurethane 501
$137.19

                Clear/No Color
                
                Bone
                
                Flaxen
                
                Wheat
                
                Sand
                
                Buff
                
                Thatch Brown
                
                Adobe
                
                Red Brick
                
                Seattle Red
                
                Concrete Gray
                
                Delta Fog
                
                Sterling
                
                Slate
                
                Safety Yellow
                
                Safety Red
                
                Safety Blue
Polyurethane 501 is a high solids, two component, water-based aliphatic polyurethane. This unique material provides performance properties equal to conventional solvent-based catalyzed urethanes without the associated health and environmental problems. It offers substantial performance improvements over first generation catalyzed water-based polyurethanes, including higher film build capabilities, improved chemical resistance and resistance to hot tire staining.   Polyurethane 501 gives hard, durable coatings that feature good gloss, easy cleanability and superior abrasion resistance. Resistance to yellowing from U.V. light is excellent. For exterior desert applications, a special U.V. absorber package can be incorporated to ensure long-term chalk resistance and gloss retention.   Polyurethane 501 has been developed as a high performance finish coat for various seamless flooring,coating, and architectural concrete applications where odor cannot be tolerated. It is the ideal top coat for areas that require maximum gloss retention, ease of cleaning, and resistance to heavy foot traffic. Typical areas of...
Polyurethane 501 is a high solids, two component, water-based aliphatic polyurethane. This unique material provides performance properties equal to conventional...
APF - Polyurethane 325
$158.30

                Clear/No Color
                
                Bone
                
                Flaxen
                
                Wheat
                
                Sand
                
                Buff
                
                Thatch Brown
                
                Adobe
                
                Red Brick
                
                Seattle Red
                
                Concrete Gray
                
                Delta Fog
                
                Sterling
                
                Slate
                
                Safety Yellow
                
                Safety Red
                
                Safety Blue
Polyurethane 325 is a three component, high solids aliphatic moisture urethane. This product offers a remarkable combination of performance properties not found in other polymer coatings. Polyurethane 325 produces protective films which are hard, flexible and very impact resistant. These coatings feature extreme abrasion and scratch resistance, easy soil release and excellent resistance to a broad range of chemicals. For exterior applications, a UV stabilizer package is incorporated to insure long term chalk resistance and gloss retention.   Polyurethane 325 has been designed as a high performance top coat in various protective coating and seamless flooring applications. It provides maximum clean-ability and stain resistance when used as a finish coat in color chip flooring or epoxy-quartz flooring. This coating is ideally suited for clean-room floors, automotive repair facilities, aircraft hangars and other high wear areas requiring resistance to fuels and chemicals.   Colors & Finishes Clear Satin Finish All 16...
Polyurethane 325 is a three component, high solids aliphatic moisture urethane. This product offers a remarkable combination of performance properties...
APF - Polyurethane 250 VOC
$113.97
Polyurethane 250 is a two component, low viscosity acrylic urethane. It is used as a primer/sealer over a variety of surfaces. The use of special solvents and adhesion promoters gives this material excellent penetration and adhesion to minimally profiled concrete. Polyurethane 250 is U.V. stable for use in exterior applications, cures rapidly and is easily recoated with both solvent-based and water-based polyurethanes. When used as a finish coat, this material gives a hard, high gloss surface that offers excellent stain resistance and easy cleanability. Compared to solvent-based acrylic sealers, Polyurethane 250 offers substantial improvements in initial gloss, gloss retention and overall performance. Polyurethane 250 is available in a satin finish if a lower gloss is desired. A special version of this material is available to meet the 50 grams/liter VOC limit in California.Polyurethane 250 has been designed for use over concrete, acid stained surfaces, and various types of architectural concrete....
Polyurethane 250 is a two component, low viscosity acrylic urethane. It is used as a primer/sealer over a variety of...
APF - Polyurethane 250
$103.69
Polyurethane 250 is a two component, low viscosity acrylic urethane. It is used as a primer/sealer over a variety of surfaces. The use of special solvents and adhesion promoters gives this material excellent penetration and adhesion to minimally profiled concrete. Polyurethane 250 is U.V. stable for use in exterior applications, cures rapidly and is easily recoated with both solvent-based and water-based polyurethanes. When used as a finish coat, this material gives a hard, high gloss surface that offers excellent stain resistance and easy cleanability. Compared to solvent-based acrylic sealers, Polyurethane 250 offers substantial improvements in initial gloss, gloss retention and overall performance. Polyurethane 250 is available in a satin finish if a lower gloss is desired. A special version of this material is available to meet the 50 grams/liter VOC limit in California.Polyurethane 250 has been designed for use over concrete, acid stained surfaces, and various types of architectural concrete....
Polyurethane 250 is a two component, low viscosity acrylic urethane. It is used as a primer/sealer over a variety of...
APF - Polyurethane 100 VOC
$141.10

                Clear/No Color
                
                Bone
                
                Flaxen
                
                Wheat
                
                Sand
                
                Buff
                
                Thatch Brown
                
                Adobe
                
                Red Brick
                
                Seattle Red
                
                Concrete Gray
                
                Delta Fog
                
                Sterling
                
                Slate
                
                Safety Yellow
                
                Safety Red
                
                Safety Blue
Polyurethane 100 VOC is a two component, high solids aliphatic polyurethane formulated to be a lower VOC option to the standard Polyurethane 100. This product offers a remarkable combination of performance properties not found in other polymer coatings. Polyurethane 100 VOC produces protective films which are hard, flexible and very impact resistant. These coatings feature high abrasion and scratch resistance, exterior durability, easy soil release and excellent resistance to a broad range of chemicals. For exterior applications, a U.V. stabilizer package is incorporated to ensure long term chalk resistance and gloss retention. A special accelerator is available when rapid project turnaround is required.   Polyurethane 100 VOC has been designed as a high performance top coat in various protective coating and seamless flooring applications. It provides maximum cleanability and stain resistance when used as a finish coat in color chip flooring or epoxy-quartz flooring. This coating is ideally suited for...
Polyurethane 100 VOC is a two component, high solids aliphatic polyurethane formulated to be a lower VOC option to the...
APF - Polyurethane 100
$121.50

                Clear/No Color
                
                Bone
                
                Flaxen
                
                Wheat
                
                Sand
                
                Buff
                
                Thatch Brown
                
                Adobe
                
                Red Brick
                
                Seattle Red
                
                Concrete Gray
                
                Delta Fog
                
                Sterling
                
                Slate
                
                Safety Yellow
                
                Safety Red
                
                Safety Blue
Polyurethane 100 is a two component, high solids aliphatic polyurethane. This product offers a remarkable combination of performance properties not found in other polymer coatings. Polyurethane 100 produces protective films which are hard, flexible and very impact resistant. These coatings feature high abrasion and scratch resistance, exterior durability, easy soil release and excellent resistance to a broad range of chemicals. For exterior applications, a U.V. stabilizer package is incorporated to insure long term chalk resistance and gloss retention. A special accelerator is available when rapid project turnaround is required. Polyurethane 100 has been designed as a high performance top coat in various protective coating and seamless flooring applications. It provides maximum cleanability and stain resistance when used as a finish coat in color chip flooring or epoxy-quartz flooring. This coating is ideally suited for clean-room floors, automotive repair facilities, aircraft hangars and other high wear areas requiring resistance to fuels...
Polyurethane 100 is a two component, high solids aliphatic polyurethane. This product offers a remarkable combination of performance properties not...
APF - Polyurea 5100
$136.63
Polyurea 5100 is a 100% solids, two-component, aliphatic polyurea/polyaspartic hybrid.  A unique resin chemistry has provided the raw materials to formulate this coating, which offers the desirable properties of polyester-polyurethane materials with virtually no odor and fewer film thickness limitations.   Polyurea 5100 is a low-viscosity, solvent-free, easy-to-handle product that provides a very high gloss finishes that are both hard and abrasion resistant. This material releases soil easily and has excellent resistance to a broad range of chemicals.   Unlike conventional polyurea materials, Polyurea 5100 has enough work time to be applied by brush and roller. It is available in both a regular cure and a fast-cure version for use in rapid turnaround projects. The fast-cure material may be used at temperatures as low as 20F. For exterior applications, a UV stabilizer package is incorporated to ensure long-term gloss retention and resistance to yellowing.   Polyurea 5100 was developed as...
Polyurea 5100 is a 100% solids, two-component, aliphatic polyurea/polyaspartic hybrid.  A unique resin chemistry has provided the raw materials to...