Chemicals/Coatings

Showing 1 - 12 of 42 results
Ameripolish - 3DSP Stain Protector
$65.00
STAIN PROTECTOR Ameripolish® 3D SP is a breathable semi-penetrating/semitopical sealer that helps to protect surfaces against stains and etching. 3D SP creates a water-resistant barrier that prevents liquids from infiltrating the surface, protecting against staining and color dispersion. Ready to use (RTU). UV stabilizers help protect against fading. Creates water-resistant barrier to prevent staining, etching, and protect color. 3D SP is a color enhancer for polish concrete floors with dye. Contains 3D densifier properties to aid in hardening and dust-proofing. COST PERFORMANCE 2-3¢ PER FT2 2,000-2,500FT2 PER GALLON Safety Data Sheet Technical Data Sheet
STAIN PROTECTOR Ameripolish® 3D SP is a breathable semi-penetrating/semitopical sealer that helps to protect surfaces against stains and etching. 3D...
APF - OIL STOP PRIMER 1.25Gal Kit
$87.99
  Oil Stop Primer is a low viscosity, 100% solids resin designed for use as a primer on concreteslabs that are contaminated with hydrocarbons, such as motor oil, solvents, cutting oils andhydraulics fluids.    Oil Stop Primer - Datasheet  Oil Stop Primer - Part A - SDS  Oil Stop Primer - Part B - SDS
  Oil Stop Primer is a low viscosity, 100% solids resin designed for use as a primer on concreteslabs that...
Hi Tech - Spall TX3
$200.00
Spall TX3 is a rapid set, high strength low viscosity polyurethane repair material. This two component, 1:1 system is designed to repair damaged joints, cracks, spalls and other concrete surface defects. Spall TX3 has additional working time when compared to TX, which makes it well suited as a pre polish filler. Spall TX3 can be hand mixed and troweled across concrete floors suffering from pinholes, pop outs and other defects. It can also be mixed with sand and cement to create a repair mortar material. Spall TX3 is low viscosity, 100% solids and VOC free. Download Color Chart Spall TX3 TDS Spall TX3 SDS Part A Spall TX3 SDS Part B
Spall TX3 is a rapid set, high strength low viscosity polyurethane repair material. This two component, 1:1 system is designed to...
Hi Tech - Spall FX
$47.00
Spall FX is a rapid set, high strength low viscosity polyurethane repair material. This two component, 1:1 system is designed to repair damaged joints, cracks, spalls and other concrete surface defects. Spall FX cures in about 15 minutes and can be ground and polished immediately. Download Color Chart Spall FX TDS Spall FX SDS Part A Spall FX SDS Part B
Spall FX is a rapid set, high strength low viscosity polyurethane repair material. This two component, 1:1 system is designed to...
CONGELZ WASTE WATER HARDENER - 40lbs
$200.00
Congelz Waste Water Hardener (BOM #107069) is the perfect method to dispose of unwanted rinse water from any cement or concrete project. Congelz patented technology is great for mortars, stuccos, grouts, patching products, and other similar materials. Using Congelz solves the issues caused by cementitious waste disposal - no more clogged drains or dumping of product on job sites. Simply add the product to your rinse water, allow to harden, and toss the works in the trash! Environmentally safe! Passes EPA 9095.   Printable Info TDS - Congelz SDS - Congelz FAQ - Congelz
Congelz Waste Water Hardener (BOM #107069) is the perfect method to dispose of unwanted rinse water from any cement or...
Vexcon - STARSEAL PS CLEAR - 5GAL
$160.02 $177.80
StarSeal PS Clear STARSEAL PS CLEAR enhances the natural beauty of gray and decorative concrete surfaces and produces a wear-pattern free, shine retentive permanently sealed, low-maintenance densified concrete floor. StarSeal PS Clear is a high solids potassium based silicate that rapidly penetrates without scrubbing and rinsing. Simply apply, re-distribute and re-apply until the concrete no longer absorbs the material. Once absorbed, StarSeal PS Clear reacts with the calcium hydroxide in the concrete producing a stronger more durable, dust free, superior looking and performing long lasting concrete floor. BENEFITS Long lasting and extremely durable High solids forumation No scrubbing or rinsing required Eliminates or reduces waste stream during installation Odorless, non-hazardous, USDA approved Easy to clean LEED points Abrasion, wear resistant No topical film to wear through Performance warranty Low maintenance. No waxing or resurfacing required Brochure StarSeal PS Clear Safety Data Sheet StarSeal PS Clear
StarSeal PS Clear STARSEAL PS CLEAR enhances the natural beauty of gray and decorative concrete surfaces and produces a wear-pattern...
APF - VaporSolve  Primer Clear Moisture Remediation Coating
$46.57
VaporSolve Primer is a specially formulated water-based epoxy designed to provide superior adhesion over concrete with high levels of moisture vapor emissions. When used with the companion finish coat, 100% solids VaporSolve 100, a coating system is achieved that reduces moisture vapor emissions to acceptable levels for all flooring and maintains its bond under continuously moist, alkaline conditions. VaporSolve Primer is also ideal over damp or green concrete. The product may be applied at temperatures between 40-100F. VaporSolve Primer is based on epoxy curing agent technology with more than 30 years of success as a concrete primer. It has been formulated with very low viscosity and surface tension to ensure excellent substrate wetting, penetration and adhesion. Laboratory testing has shown that VaporSolve Primer penetrates 25-30% deeper into concrete than low viscosity (250 cps) 100% solids epoxy. This exceptional penetration and adhesion gives VaporSolve Primer a distinct advantage over 100% solids...
VaporSolve Primer is a specially formulated water-based epoxy designed to provide superior adhesion over concrete with high levels of moisture...
APF - VaporSolve 100 Clear Moisture Barrier Coating
$72.47
VaporSolve 100 is a specially formulated 100% solids epoxy coating designed for use over concrete with high moisture levels for the purpose of isolating the concrete from moisture sensitive flooring. When used without a primer in a single application, it is referred to as the VaporSolve Basic System. This system should only be used over concrete that has never been treated with reactive silicate curing compounds or densifiers. VaporSolve 100 has been formulated with low viscosity and excellent substrate wetting capabilities to promote penetration and adhesion. The special hydrophobic curing agent allows for adhesion to damp or wet concrete. This product will cure fully even when applied underwater. In addition, VaporSolve 100 is based on Bisphenol F epoxy which gives the material enhanced chemical crosslinking over products based on standard Bisphenol A epoxy. More crosslinking helps to reduce the coatings moisture permeability and increases its long-term resistance to water and...
VaporSolve 100 is a specially formulated 100% solids epoxy coating designed for use over concrete with high moisture levels for...
APF - VaporSolve™ 100 Clear Moisture Barrier Coating
$72.47
VaporSolve™ 100 is a specially formulated 100% solids epoxy coating designed for use over concrete with high moisture levels for the purpose of isolating the concrete from moisture sensitive flooring. When used without a primer in a single application, it is referred to as the VaporSolve™ Basic System. This system should only be used over concrete that has never been treated with reactive silicate curing compounds or densifiers. VaporSolve™100 has been formulated with low viscosity and excellent substrate wetting capabilities to promote penetration and adhesion. The special hydrophobic curing agent allows for adhesion to damp or wet concrete. This product will cure fully even when applied underwater. In addition, VaporSolve™ 100 is based on Bisphenol F epoxy which gives the material enhanced chemical crosslinking over products based on standard Bisphenol A epoxy. More crosslinking helps to reduce the coating’s moisture permeability and increases its long-term resistance to water and alkalinity....
VaporSolve™ 100 is a specially formulated 100% solids epoxy coating designed for use over concrete with high moisture levels for...
APF - VaporSolve™ Primer Clear Moisture Remediation Coating
$46.57
VaporSolve™ Primer is a specially formulated water-based epoxy designed to provide superior adhesion over concrete with high levels of moisture vapor emissions. When used with the companion finish coat, 100% solids VaporSolve™ 100, a coating system is achieved that reduces moisture vapor emissions to acceptable levels for all flooring and maintains its bond under continuously moist, alkaline conditions. VaporSolve™ Primer is also ideal over damp or green concrete. The product may be applied at temperatures between 40-100 °F. VaporSolve™ Primer is based on epoxy curing agent technology with more than 30 years of success as a concrete primer. It has been formulated with very low viscosity and surface tension to ensure excellent substrate wetting, penetration and adhesion. Laboratory testing has shown that VaporSolve™ Primer penetrates 25-30% deeper into concrete than low viscosity (250 cps) 100% solids epoxy. This exceptional penetration and adhesion gives VaporSolve™ Primer a distinct advantage over 100%...
VaporSolve™ Primer is a specially formulated water-based epoxy designed to provide superior adhesion over concrete with high levels of moisture...
APF - Polyurea 5100
$136.63
Polyurea 5100 is a 100% solids, two-component, aliphatic polyurea/polyaspartic hybrid.  A unique resin chemistry has provided the raw materials to formulate this coating, which offers the desirable properties of polyester-polyurethane materials with virtually no odor and fewer film thickness limitations.   Polyurea 5100 is a low-viscosity, solvent-free, easy-to-handle product that provides a very high gloss finishes that are both hard and abrasion resistant. This material releases soil easily and has excellent resistance to a broad range of chemicals.   Unlike conventional polyurea materials, Polyurea 5100 has enough work time to be applied by brush and roller. It is available in both a regular cure and a fast-cure version for use in rapid turnaround projects. The fast-cure material may be used at temperatures as low as 20F. For exterior applications, a UV stabilizer package is incorporated to ensure long-term gloss retention and resistance to yellowing.   Polyurea 5100 was developed as...
Polyurea 5100 is a 100% solids, two-component, aliphatic polyurea/polyaspartic hybrid.  A unique resin chemistry has provided the raw materials to...
APF - Polyurea 5001
$122.67

                Bone
                
                Flaxen
                
                Wheat
                
                Sand
                
                Buff
                
                Thatch Brown
                
                Adobe
                
                RED BRICK
                
                Seattle Red
                
                Concrete Gray
                
                Delta Fog
                
                Sterling
                
                Slate
                
                Safety Yellow
                
                Safety Red
                
                Safety Blue
Polyurea 5001 is a two component, ultra high solids, aliphatic polyurea/polyaspartic hybrid. It is a pigmented material capable of obtaining excellent adhesion to dry, properly prepared concrete. Polyurea 5001 is a low viscosity, easy to handle product that gives very high gloss finishes that are both hard and abrasion resistant. The material releases soils easily and has excellent resistance to a broad range of chemicals. It is a very fast curing material and may be used at temperatures as low as 20F, making it ideal for use in cold weather or rapid turnaround projects.   Polyurea 5001 was developed as a fast cure primer and finish coat for various protective coating and seamless flooring applications. Its use as a primer and base coat in color chip flooring allows for the application to be completed in one day, even at lower temperatures. As a fast curing high performance finish coat, typical...
Polyurea 5001 is a two component, ultra high solids, aliphatic polyurea/polyaspartic hybrid. It is a pigmented material capable of obtaining...