New Arrivals

Cobra Premium Cupwheel
$74.70 $99.60
Cobra High premium segments designed for long product life Exclusive segment pattern is very aggressive Ideal for levelling concrete floors Available in 5/8-11 thread or 7/8"-5/8" bore  
Cobra High premium segments designed for long product life Exclusive segment pattern is very aggressive Ideal for levelling concrete floors Available...
Prime Shine Surface Honing Solution (SHS) 5GAL
$210.00
A surface honing solution with patented technology formula, allowing you to prepare the surface in conjunction with US Abrasives specially formulated grinding consumables by speeding up the process and ensuring the substrate is ready for polishing. With the use of a specific form of molecular nanotech, this science allows the product to penetrate deeper and helps enhance the hardening process, this is making it more defiant to surface abrasion. Providing extreme stock removal of all irregularities and leaving you fundamentally with a scratch free surface.   STORAGE AND HANDLING Store in a cool, dry place with adequate ventilation. Always seal container after dispensing. Do not alter or mix with other chemicals. Published shelf life assumes upright storage of factory-sealed containers in a dry place. Maintain temperature.  Keep from freezing. Do not double stack pallets. Dispose of unused product and container in accordance with local, state and federal regulations.   TYPICAL...
A surface honing solution with patented technology formula, allowing you to prepare the surface in conjunction with US Abrasives specially...
Fast-Prep 675 - 27" (675mm)
$13,500.00
The Fast-Prep 675åÊFeatures: 10 HP Motor with variable frequency drive Speeds : 0-2,600 RPM 6 DRIVE PLATES: 6 * 7inch velcro drive plates ORåÊ 6 * 7inch plates that hold 2 traditional diamond toolsåÊ Optional plates to hold more diamond tooling.åÊ Quick change tooling system Weight : 300lbs (136kg) Up to (4) 32lb (14.5kg) weights (optional) 2" (50mm) Vacuum Port Easy to adjust dust shroud to help dust containment 27" wide cuts within 1/4" from the wall. Runs on 208-230V Single Phase or 3 Phase /50 Amp Easy to change Poly V belt drive Amp readout on control panel allows maximum weight without overloading motor. Prep up to 2000 square feet (200sm) per hour * Easy to carry Optional 128lb (58kg) Add-on weights 2 Year Manufacturer's Warranty. 100% Made in USA *Exact amount of square footage per hour depends on the porosity and condition of the floor.
The Fast-Prep 675åÊFeatures: 10 HP Motor with variable frequency drive Speeds : 0-2,600 RPM 6 DRIVE PLATES: 6 * 7inch...
Pulse-Bac Pro 176 20Gal Tank Package
$2,695.00
NEW PINLESS DESIGN • 5X DUTY CYCLE SOLENOIDS The PRO Series is the newest addition to the Pulse-Bac line-up. The successor to the legendary 1000 Series and like the 1000 Series, it offers a large array of power and collection options. It also has new features designed to improve usability and durability. Built to capture dust generated by surface preparation equipment, power tools and for jobsite cleanup, the PRO Series excels at work involving dust from concrete, drywall, wood, asbestos, and many other materials. With a lineage of legendary performance & innovative improvements, the PRO Series is sure to be the choice of professionals. Airflow: 176-311 CFM Filtration: HEPA 99.97% @ .3 Microns Inlet: 2″ Collection: 20 Gal Steel Tank; Longpac Bagger or 55Gal Drum   Features & Benefits PRO SERIES Power Options If there is one thing that sets the PRO Series apart it’s the large array of configurations....
NEW PINLESS DESIGN • 5X DUTY CYCLE SOLENOIDS The PRO Series is the newest addition to the Pulse-Bac line-up. The...
Tank Long Life Hybrid Disc
$38.16 $50.88
Advantages: premium engineering technique provides a superior long life with superior removal rates. Handles heavy scratches without the pad becoming sacrificial. Leaves the surface with great profile!Can be used Wet and or Dry.Segment Height: 15mm
Advantages: premium engineering technique provides a superior long life with superior removal rates. Handles heavy scratches without the pad becoming...
CONGELZ™ WASTE WATER HARDENER - 40lbs
$180.00 $200.00
Akona® Congelz™ Waste Water Hardener (BOM #107069) is the perfect method to dispose of unwanted rinse water from any cement or concrete project. Congelz patented technology is great for mortars, stuccos, grouts, patching products, and other similar materials. Using Congelz solves the issues caused by cementitious waste disposal - no more clogged drains or dumping of product on job sites. Simply add the product to your rinse water, allow to harden, and toss the works in the trash! Environmentally safe! Passes EPA 9095.   Printable Info TDS - Congelz SDS - Congelz FAQ - Congelz
Akona® Congelz™ Waste Water Hardener (BOM #107069) is the perfect method to dispose of unwanted rinse water from any cement...
APF - VaporSolve™ 100 Clear Moisture Barrier Coating
$72.47
VaporSolve™ 100 is a specially formulated 100% solids epoxy coating designed for use over concrete with high moisture levels for the purpose of isolating the concrete from moisture sensitive flooring. When used without a primer in a single application, it is referred to as the VaporSolve™ Basic System. This system should only be used over concrete that has never been treated with reactive silicate curing compounds or densifiers. VaporSolve™100 has been formulated with low viscosity and excellent substrate wetting capabilities to promote penetration and adhesion. The special hydrophobic curing agent allows for adhesion to damp or wet concrete. This product will cure fully even when applied underwater. In addition, VaporSolve™ 100 is based on Bisphenol F epoxy which gives the material enhanced chemical crosslinking over products based on standard Bisphenol A epoxy. More crosslinking helps to reduce the coating’s moisture permeability and increases its long-term resistance to water and alkalinity....
VaporSolve™ 100 is a specially formulated 100% solids epoxy coating designed for use over concrete with high moisture levels for...
Raven Hybrid Disc
$36.30 $48.40
This tool was created using the industry's latest technology and is a new transitional pad thatworks just as well whether it beused wet or dry. It's 12 segment design offers aggressivity all whileåÊproviding great wear rates. It's 10mmåÊworking thickness handles high heatåÊefficiently making this a premiumåÊhybrid.
This tool was created using the industry's latest technology and is a new transitional pad thatworks just as well whether...

Best Sellers

Rhombus Double Grinding Plate
$36.26 $48.35
This premium tool has large segments that allow the tackling of the fiercest substrates. Offering a fantastic wear rate without taking away from it's grinding abilities, this tool will open right away and provide great stock removal.
This premium tool has large segments that allow the tackling of the fiercest substrates. Offering a fantastic wear rate without...
Quick Cut Shredders
$28.88 $38.50
The Shredder Tool is able to withstand high temperature conditions all while continuously providing an aggressive removal of epoxies, high build coatings, overlays and other toppings. As an added bonus, this tool will not break the bank. While comparing it to a PCD, the Shredders are a fraction of the price, which will allow for lots of end of year savings with cost of materials and labor!̴Ì_
The Shredder Tool is able to withstand high temperature conditions all while continuously providing an aggressive removal of epoxies, high...
Prime Shine Densifier 5GAL
$225.00
PRIME SHINE DENSIFIER With innovative PATENTED technology, Prime Shine has a ability to provide a product that reacts and gives the positive aspects of sodium, potassium and lithium silicates. The revolutionary TRI-BOND Technology delivers a surface that forms a crystalline barrier within the pores to stop water, moisture, vapors and prevents dusting, heightening the resulting shine. A finished Prime Shine surface is breathable, but the transformed pore assembly prevents the passage of elements that cause efflorescence on the surface. Furthermore, it increases abrasion resistance, which increases the durability of the shine.   STORAGE AND HANDLING Store in a cool, dry place with adequate ventilation. Always seal container after dispensing. Do not alter or mix with other chemicals. Published shelf life assumes upright storage of factory-sealed containers in a dry place. Maintain temperature.  Keep from freezing. Do not double stack pallets. Dispose of unused product and container in accordance with local,...
PRIME SHINE DENSIFIER With innovative PATENTED technology, Prime Shine has a ability to provide a product that reacts and gives...
The Triton - 20" (500mm)
$4,995.00
Please see the features below on the Maverick Triton
Please see the features below on the Maverick Triton

Address

5780 Main Street NE
Minneapolis, MN 55432

Don't see what you need?

Call us! We most probably have it, or will make it for you! No tool or product is unheard of!

You can't go wrong with US Abrasives Tooling!

Albert V. - VOS.E.C.

Customer service is the best in the industry. The quality is consistent. The tools are affordable so I can own several sets of everything at a reasonable price and always be prepared for what ever job is thrown at me. I’ve done business with the team well over ten years and unfortunately before US Abrasives, I had to go through lots of diamond tool suppliers who cared more about making a buck then giving me the tools I actually needed to get the job done right the first time.

Lucas R. - CCS

I am very happy with the service and advice on which tools will offer best production rates on my projects. Jordan and the team are always there to help.

Todd B.- NCRP