UltraDT – UltraSpartic 85‑FAST Polyaspartic (2 Gallon Kit)

Product Overview

UltraSpartic 85‑FAST is engineered for projects requiring fast drying and quick return‑to‑service. This high‑solids polyaspartic floor coating features a low odor and low viscosity (150 CPS), making it ideal for large-scale jobs in dry or cold climates. With a working time of only 12 minutes and a dry time of approximately 2 hours, UltraSpartic 85‑FAST is perfect for environments such as garages, warehouses, and production areas where downtime must be minimized.

Typical Applications

• Topcoats for decorative and industrial concrete floors
• Clear or pigmented primer, body coat, or broadcast coat when combined with UltraColor E/P Pigment Packs
• Ideal for applications requiring fast recoating and short return‑to‑service times

Unique Advantages

• High‑solids formulation (85%) for excellent durability and UV stability
• Very low odor and low VOC (50‑state VOC and DOT compliant)
• Rapid dry time of 2 hours with a short working time of 12 minutes
• Low viscosity ensures superior leveling and ease of application
• Tintable with UltraColor E/P Pigment Packs for on‑site custom color matching
• DOT and IATA non‑regulated for safe handling and transport

Product Specifications

• Packaging: 2-Gallon Kit – 1‑gal can Part A + 1‑gal can Part B
• Mixing Ratio: 1:1 by volume
• Solids Level: 85%
• Dry Time: Approximately 2 hours for light foot traffic
• Working Time: 12 minutes (at 70°F / 50% RH; note that FAST is optimized for rapid use)
• Coverage Rate: Average 120–320 sq. ft. per gallon (film build of 5–13 mils)
• Shelf Life: 1 year when unopened and stored at 59–77°F (15–25°C)

Mixing & Application Instructions

• Ensure Parts A and B are at room temperature (59–77°F, 15–25°C) prior to mixing.
• Wear appropriate personal protective equipment (gloves and safety glasses).
• Pre‑mix Part A for 1 minute; optionally add UltraColor E/P Pigment Pack for tinting until a uniform color is achieved.
• Add Part B by volume to attain a 1:1 mix, then blend using a low‑speed drill for approximately 3 minutes.
• Complete application (spreading and rolling) within the 12‑minute working time for optimal performance.

Finished Floor Example

Product Documentation

• UltraSpartic PDS
• UltraSpartic 85‑FAST TDS
• SDS – Part A
• SDS – Part B

Additional Information

UltraSpartic 85‑FAST is ideally suited for fast-paced projects where minimizing downtime is critical. Its rapid drying properties, combined with excellent leveling and adhesion, make it a top choice for high-traffic and industrial flooring applications. For best results, ensure that the substrate is properly prepared (e.g., shot-blasted or diamond ground to a CSP 2–CSP 3 profile) before application.