UltraDT – UltraSpartic 85‑EXT Polyaspartic (2 Gallon Kit)

Product Overview

UltraSpartic 85‑EXT is a unique, high‑solids polyaspartic floor coating developed for demanding applications such as garages, warehouses, production areas, and other abusive concrete environments. Its long working time, low viscosity (150 CPS), and extremely low odor make it especially user‑friendly in warm and humid climates.

Typical Applications

• Primer, body coat, broadcast coat, or topcoat for decorative and industrial concrete floors
• Ideal for use with full or sparse broadcast chip flakes, quartz granules, or UltraColor E/P Pigment Packs for on‑site tinting

Unique Advantages

• High‑solids at 85% for excellent durability and non‑yellowing, UV‑stable performance
• Low odor and low viscosity allow for outstanding leveling and ease of application
• Tintable with UltraColor E/P Pigment Packs for custom color matching
• DOT and IATA (air) non‑regulated for safe handling and transport

Product Specifications

• Packaging: 2-Gallon Kit (1‑gal can Part A + 1‑gal can Part B)
• Mixing Ratio: 1:1 by volume
• Solids Level: 85%
• Dry Time: Approximately 8 hours for light foot traffic
• Working Time: 25 minutes (at 70°F / 50% RH)
• Coverage Rate: Average 120–320 sq. ft. per gallon (film build of 5–13 mils)
• Shelf Life: 1 year when unopened and stored at 59–77°F (15–25°C)

Mixing & Application

• Ensure Parts A and B are at room temperature (59–77°F, 15–25°C) before mixing.
• Wear proper PPE (gloves and safety glasses) during mixing.
• Pre‑mix Part A for 1 minute; optionally add UltraColor E/P Pigment Pack for on‑site tinting.
• Add Part B by volume to achieve the 1:1 mix ratio and blend with a low‑speed drill for about 3 minutes.
• Complete spreading and rolling within the stated working time to ensure optimum performance.

Finished Floor Example

Product Documentation

• UltraSpartic PDS
• UltraSpartic 85‑EXT TDS
• SDS – Part A
• SDS – Part B

Additional Information

UltraSpartic 85‑EXT delivers exceptional durability, excellent leveling, and outstanding bond strength even at low film thicknesses. Its performance in resisting hot tire damage, UV degradation, and chemical attack makes it an ideal choice for high-traffic and industrial flooring systems. For optimal results, ensure the concrete substrate is properly prepared (e.g., shot-blasted or diamond ground to a CSP 2–CSP 3 profile) before application.