Product Overview
F‑41 is a low‑viscosity, 100 % solids, clear epoxy topcoat formulated with a UV‑resistant cycloaliphatic amine hardener. It delivers excellent flow, self‑leveling characteristics, and broad‑spectrum chemical, abrasion, and impact resistance.:contentReference[oaicite:0]{index=0}
Typical Uses
- UV‑exposed interior floors in showrooms, warehouses, arenas, and hospitality spaces:contentReference[oaicite:1]{index=1}
- Metallic body‑coat or clear seal coat over decorative broadcast systems
- Protective clear finish where high gloss and durability are required
Kit Contents (3‑gal mix)
- Part A – 2 gal clear epoxy resin
- Part B – 1 gal UV‑resistant hardener
- Total mixed yield: 3 gal | Coverage ≈ 400 ft² @ 12 mil (10–16 mil recommended):contentReference[oaicite:2]{index=2}
Key Features
- 100 % solids • < 50 g/L VOC:contentReference[oaicite:3]{index=3}
- 2 : 1 mix ratio by volume:contentReference[oaicite:4]{index=4}
- Low viscosity (600–700 cP) for superior leveling:contentReference[oaicite:5]{index=5}
- Gel time ≈ 60 min @ 77 °F (25 °C):contentReference[oaicite:6]{index=6}
- Dry‑to‑touch 5–6 hrs • Light use 24 hrs • Full cure 7 days:contentReference[oaicite:7]{index=7}
- Shore D 65 (24 h) → 78 (7 d):contentReference[oaicite:8]{index=8}
- High‑gloss finish (≥ 90 GU @ 60°):contentReference[oaicite:9]{index=9}
Mixing & Application
Combine all of Part A and Part B in a clean pail and mix at 350 RPM for 2–3 minutes with a low‑shear blade. Pour immediately, spread with a notched squeegee, and back‑roll with a 3⁄8″ nap roller. Re‑coat within 24 hours. Clean tools with acetone or xylene.:contentReference[oaicite:10]{index=10}
Cure Schedule @ 70 °F (21 °C)
| Gel time |
≈ 60 min |
| Dry‑to‑touch |
5–6 hrs |
| Light traffic |
24 hrs |
| Full cure |
7 days |
Downloads
F‑41 Technical Data Sheet (PDF)
Always review the full TDS & SDS before use.
