Product Detail

APF - VaporSolve 100 Clear Moisture Barrier Coating

Quick Overview
VaporSolve 100 is a specially formulated 100% solids epoxy coating designed for use over concrete with high moisture levels for the purpose of isolating the concrete from moisture sensitive flooring....
Size

$72.47

VaporSolve 100 is a specially formulated 100% solids epoxy coating designed for use over concrete with high moisture levels for the purpose of isolating the concrete from moisture sensitive flooring. When used without a primer in a single application, it is referred to as the VaporSolve Basic System. This system should only be used over concrete that has never been treated with reactive silicate curing compounds or densifiers.

VaporSolve 100 has been formulated with low viscosity and excellent substrate wetting capabilities to promote penetration and adhesion. The special hydrophobic curing agent allows for adhesion to damp or wet concrete. This product will cure fully even when applied underwater. In addition, VaporSolve 100 is based on Bisphenol F epoxy which gives the material enhanced chemical crosslinking over products based on standard Bisphenol A epoxy. More crosslinking helps to reduce the coatings moisture permeability and increases its long-term resistance to water and alkalinity.

The material contains no plasticizers, phenols or unreacted amines that could migrate out of the cured coating and trigger osmotic blistering. VaporSolve 100 is available in a fast cure version when quicker turnaround is necessary. The product may be applied at temperatures between 40F.

100% solids epoxies are more prone to adhesion failure than properly formulated water-based epoxies when applied to silicate-contaminated concrete. If silicate materials have been previously applied to the concrete, or if the history of the concrete cannot be positively determined, use VaporSolve Primer underneath VaporSolve 100. The VaporSolve materials are designed to remediate all concrete moisture problems, regardless of severity. These systems may be used in new construction settings when a schedule must be met, yet the concrete is not dry enough to install moisture sensitive flooring. They can also be used over concrete with known moisture problems and over concrete that has been placed without a vapor retarder as a means of preventing future moisture problems.

Chemical Composition

Modified Bisphenol F epoxy crosslinked with a hydrophobic amine curing agent. Cured product contains no unreacted migrating components.

Colors

Clear

Considerations

  • Must be applied over VaporSolve‰ã¢ Primer if silicate contamination of the concrete is a possibility.
  • Concrete must be clean and have a SCP profile of 3 4 (texture similar to 60 80 grit sandpaper).
  • Must be applied at the specified film thickness.
  • 100% solids epoxy coatings applied over shotblasted, unprimed concrete may exhibit outgassing bubbles. These bubbles are self-sealing and have been proven to reduce the effectiveness of the coating.

Documentation

Purchasing & Delivery

Before You Buy

To avoid delivery day disappointments, please note that our same-day shipping for in-stock items cut off time is 3:00pm central time. If a lift gate or any other specifics are required, you must mention ahead of time to avoid shipping delays.

Warranty Information

LIMITED WARRANTIES
Limited Warranties are available on diamond tools only. Unused products can be returned within 30 days for a restocking fee of 25%.

Payment Information

No product will be shipped without payment being received first. Payment terms are available, based on credit approval.